2015-16

S.NO Publications
1

Sri J A RangaBabu, “CFD Analysis of hybrid Nanofluid based Solar Flat Plate Collector”, Energy Procedia, Elsevier, 2016

2

Sri L. Ramesh,SriK.Ch. Kishor Kumar, SriD. Kiran Prasad (January, 2016) “Experimental and Finite Element Model Analysis of an un-cracked and cracked Cantilever beam” International Journal of Advanced Research in Science, Engineering and Technology, Vol. 3, Issue 1, ISSN:2350-0328, Page Nos. 1266-1274.

3

Dr. Burra Karuna Kumar, “Optimality of cycle time and inventory decisions in a coordinated and non-coordinated three-echelon supply chain under exponential price dependent demand”, Int. J. Logistics Systems and Management, Vol. 25, No. 2, 2016

4

Sri Narasimha Suri Tinnaluri, “Visualization of Energy Transport in 2-D Complex Solid Geometries”,978-1-4673-9925-8/16/$31.00©2016 IEEE.

5

Sri B. V. S. Raghu Vamsi (2015) “Mathematical Modelling for CTOD Based M-Criterion For The Determination Of Triaxiality Under Mixed Mode (I/II) Fracture”, Academic Journal of Science, ISSN: 2165-6282:: 04(02):17–32.

6

Sri Narasimha Suri Tinnaluri, A collocated grid based finite volume approach for the visualization of heat transport in 2D complex geometries, Procedia Engineering, Elsevier, 127 (2015), 79-86

7

Sri RangaBabu J A, “Numerical analysis and validation of heat transfer mechanism in flat plate collectors”, Procedia Engineering, Elsevier, 127 (2015), 79-86

8

Sri J.A.RangaBabu, “Preparation and Characterization of GFRPC Material”, MaterialsToday Proceedings, Elsevier, 2015

9

Sri M.R.Ch. Sastry (Dec. 2015) “Experimental and computational study of fluid flow on a flat plate with three rectangular impinging slot jets" Indian Journal of Engineering & Materials Sciences – ISSN-0975-1017 (Online), 0971-4588 (Print) Vol.22, PP 631-640.

10

Dr. A. JawaharBabu (Aug. 2015) “Quantification of Subjectivity for better Decision making-Role of Mathematics" published in GEC's International Journal of Innovation Technology and Management - ISSN No.2394-594 X - Vol No.2 P.No.66 to 69.

11

SriP.V. Siva Teja (July, 2015)“Finite Element Analysis in Drilling GFRP Composites” Indian Journal of Science and Technology, Vol 8(15), 59588, ISSN (Print) : 0974-6846.

12

Conferences(2015-16)

13

Dr. B. Karuna Kumar has presented a paper entitled "Optimality of Inventory Decisions and Total Relevant Costs in a Coordinated Two-Level Supply Chain under Exponential Price Dependent Demand" at International conference on E-Business and Supply Chain Competitiveness (EBSCC 2016), held at the Indian Institute of Technology Kharagpur, February 12-14, 2016.

14

Thella Babu Rao, A Gopala Krishna, P Ravindra Babu, P.N.S. Srinivas have presented  a paper entitled “3D Elastic-plastic finite element model for three roller tube spinning” Proceedings of International Conference on Computer Aided Engineering (CAE2015), December 10-12, 2015, pp 133-GITAM University, Hyderabad.

15

Thella Babu Rao, Konjeti Rama Krishna, A Gopala Krishna, P Ravindra Babu have published a paper entitled  “A numerical model to predict the peak temperature during friction stir welding”, International Conference on Computer Aided Engineering (CAE2015), December 10-12, 2015, GITAM University, Hyderabad.

16

Thella Babu Rao, Naresh Baki, A Gopala Krishna, P Ravindra Babu, Galib Ila have published a paper entitled  “A comparative analysis on cutting tool temperatures of rotary and conventional turing tools”, International Conference on Computer Aided Engineering (CAE2015), December 10-12, 2015, GITAM University, Hyderabad.

17

Thella Babu Rao, A Gopala Krishna, Yellasiri Priyadarsini, Naresh Baki, have published a paper entitled  “Numerical analysis and mathematical modeling of temperature and wear rate through FEM and RSM” International Conference on Computer Aided Engineering (CAE2015), December 10-12, 2015, GITAM University, Hyderabad.

18

Dr. A. Jawahar Babu has presented a paper entitled "Role of Mathematics in Quantification of Subjectivity for better Decision Making" at International conference on Energy, Environment and Engineering at Coimbatore Institute of Technology coimbator held form 29.02.2016 to 02.03.2016.

2016-17

S.NO Publications
1

Sri J. Chandra Sekhar, Sri B. Kotilingam, “Fabrication and Tribological studies of Blast furnace-slag particles reinforced A356 composite for Automobile Components (Clutch Assembly)”, International Journal of Innovative Technology and Research, VOl. 5, Issue No 3, May-2017, pg. 6082-6084.

2

Dr. M.R.Ch. Sastry,SriR. Jithendra Kumar, Sri I. MeharAnudeep, Sri N. Premdas (April, 2017) “Vortex Flow over the flat plate and backward facing step” IOSR Journal of Engineering (OSRJEN) ISSN(e): 2250-3021, ISSN (p): 227-8719 Vol. 07, Issue 04, PP 20-31.

3

Sri G. Karuna Kumar (1 March, 2017) “Biological Extraction of Power from Bio Mass” International Journal of Engineering Science Invention Research & Development (IJESIRD) ISSN 2349-6185, Volume 3, Issue 8.

4

Sri R. Jithendra Kumar (March, 2017) “Automatic Scissor Jack Using Car Battery” International Journal of Engineering Technology, Management and Applied Sciences (IJETMAS), ISSN 2349-4476.

5

Sri Sravan Kumar Yadav (January, 2017) “Multiobjective Optimization During Wire EDM of WE 4.79% Composite Using Controlled NSGA II” International Journal of Modern Trends in Engineering and Research (IJMTER) Volume 04, Issue 1, IISN (Online): 2349-9745, ISSN (Print): 2393-8161.

6

Sri BurraKaruna Kumar, “Three-echelon supply chain with centralised and decentralised inventory decisions under linear price dependent demand”, Int. J. Logistics Systems and Management, Vol. 23, No. 2, 2016

7

Dr. P. RavindraBabu, Sri K.Ch. Kishor Kumar, SriT. Nagaraju (January, 2017) “Vibrational Analysis in Condition Monitoring and Faults Diagnosis of Rotating Shaft Over View” International Journal of Advanced Engineering, Research and Science (IJAERS) Vol-4, Issue-1, Page No. 216-220.

8

Ms. B. Anusha(January, 2017) “Performance Analysis of Absorption Refrigeration Cycles” International Journal of Advanced Engineering Research and Science (IJAERS) Vol-4, Issue-1, ISSN: 2349-6495(P) | 2456-1908(O)

9

Sri Sravan Kumar Yadav (November, 2016) “Studies of Rock Bed Solar Thermal Storage System for Space Heating Applications” International Journal of Emerging Trends in Science and Technology, IC Value: 76.89 (Index Copernicus) Impact Factor: 2.838, IJETST-Vol.03, Issue: 11, Pages 4764-4770, ISSN: 2348-9480.

10

Dr. A. JawaharBabu (Oct., 2016) “Section of Bio-Implant Materials for Knee Replacement using Topsis Method” International Journal o0f Engineering Sciences & Research Technology, ISSN: 2277-9655, Value: 3.00, Impact Factor: 4.116, pp. 81-85.

11

Dr. B. Karuna Kumar (Oct., 2016) “Supply Chain Coordination Models: A Literature Review” Indian Journal of Science and Technology, Vol 9 (38), DOI:10:17485 /ijst/2016 /v9i38/86938, October, 2016.

12

Sri J A RangaBabu, “Experimental Investigation of Diesel Engine with Design Modifications in Piston: Inducing Turbulence by Swirl”, Energy Procedia, Elsevier, 2016

13

Sri L. Ramesh (July., 2016) “Crack detection in structural beams by using curvature mode shapes”, International Journal for Innovative Research in Science and Technology, Vol 3. Issue 2, ISSN: 2349-6010

14

Sri P. N. S. Srinivas (July, 2016), “Enhancement of Mechanical, Microscopic and Tribological Properties of Hybrid Metal Matrix Composite Reinforced with Alumina, Graphite and Silicon Carbide”, International Journal of Latest Engineering Research and Applications, Vol. 01, Issue No. 04, ISSN: 2455-7137

15

Conferences(2016-17)

16

R. Jithendra Kumar has presented a paper entitled "Automatic Scissor Jack Using Car Battery” in the Two Days International Conference on Research Trends in Engineering, Applied Science and Management (ICRTESM-2017) at Modi Institute of Technology, Kota in Association with Conference Info on 18th – 19th March, 2017.

17

Dr. B. Karuna Kumar has presented a paper entitled "Coordinated Two-Echelon Inventory Model for Optimal Inventory and Shipment Decisions Under Exponential Price Dependent” in the International Conference on Materials, Manufacturing and Modelling  at VIT University, Vellore held during 9th – 11th March, 2017.

18

G. Karuna Kumar has presented a paper entitled "Supplier Selection and Order Allocation in Supply Chain” in the International Conference on Materials, Manufacturing and Modelling  at VIT University, Vellore held during 9th – 11th March, 2017.

19

T. Siva Krishna and Smt. M. Krishna Prasanna have presented a paper entitled "Design and Optimization of IC Engine based Co-generation System using Integrated Thermal Management Controller" in the Two-Day National Conference on “Recent Advances in Mechanical Engineering” (RAME-2017) at Andhra University College of Engineering (A), Visakhapatnam, supported by TEQIP-II held during 10th – 11th March, 2017.

20

Smt. M. Krishna Prasanna and T. Siva Krishna have presented a paper entitled "Experimental Investigation of Heat Transfer in Plain and Tapered Cylindrical Fins" in the Two-Day National Conference on “Recent Advances in Mechanical Engineering” (RAME-2017) at Andhra University College of Engineering (A), Visakhapatnam, supported by TEQIP-II held during 10th – 11th March, 2017.

21

B. Ramesh Nayak and Johnyshiada Shaik have presented a paper entitled "Design and Optimization of Piston and Determination of its Thermal Stresses using UG & Ansys " in the Two-Day National Conference on “Recent Advances in Mechanical Engineering” (RAME-2017) at Andhra University College of Engineering (A), Visakhapatnam, supported by TEQIP-II held during 10th – 11th March, 2017.

22

P. Murari has presented a paper entitled "Experimental Investigation on the Effect of Postweld Heat Treatment on the Mechanical Properties of SS304 Weldment Fabricated” in the Two-Day National Conference on “Recent Advances in Mechanical Engineering” (RAME-2017) at Andhra University College of Engineering (A), Visakhapatnam, supported by TEQIP-II held during 10th – 11th March, 2017.

23

K.Ch. Kishor Kumar, D. Kiran Prasad and B.V.S. Raghu Vamsi have presented a paper entitled "Finite Element Analysis of An Edge Cracked Plate Subjected to Mixed Mode Loading (I/II) and Combined Tension-Bending a comparative study" in the 5th International Conference on Advanced Computing, Engineering & Technology (ICACET 2017) held in The Solitaire Hotel, Bangalore, India on 17th February, 2017.

24

Sravan Kumar Yadav has presented a paper entitled "Preparation and characterization of ZA27-Alumina Graphite reinforced hybrid composites" at the 5th  International Conference -on Recent Advances in Composite Materials organized by KL University, Vaddeswaram, Guntur Dist., held from 6th  – 8th February, 2017.

25

T. Nagaraju has presented a paper entitled "Effect of  Mould Vibrations on Mechanical and Metallurgical Properties of Aluminum 356 Casting" at the First International and Eighteenth National ISME Conference on Mechanical Engineering: Enabling Sustainable Development (ISME-2017) at National Institute of Technology, Warangal, India held from 23rd – 25th January, 2017.

26

B.V.S. Raghuvamsi has presented a paper entitled "Studies On The AFfect Of Stress Triaziality On Strain Energy Density And Ctod Under Plane Stress Condition Subjected To Mixed Mode (I/II) Fracture" in 2nd International Conference on Sustainable Computing Techniques in Engineering, Science and Management (SCESM 2017) organized by SN Education Society, India and URGCEE, USA at Jain College of Engineering, Belagavi, India held from 27th – 28th January, 2017.

27

Dr. M.R.Ch. Sastry and R. Jithendra Kumar have presented a paper entitled "Vortex Flow over the flat Plate and Backward Facing Step" in the International Conference on Emerging Multidisciplina;ry Research and Computational Intelligence – 2016 organized by Dhumra Mahate Information and Communications Technology Associates and S.R.K.R. Engineering College, Bhimavaram held from 15th – 16th December, 2016.

28

Dr. A. Jawahar Babu has presented a paper entitled "Selection of Bio-Implant Material for Knee Replacement using TOPSIS method" in the National conference on Innovations in Mechanical Engineering (NCIME 16) at Madanapalle Institute of Technology & Science, Madanapalle, Chittoor Dist held from 21.10.2016 to 22.10.2016, ISBN 978-93-85100-70-3, page nos. 40-44.

29

M. Kamal Tej and K. Kumara Swamy have presented a paper entitled "Experimental Study on Performance of PCM Based Air-Conditioned Evaporators" in the National Symposium of Mechanical Engineering Research Scholars at National Institute of Technology Warangal held on 07.10.2016.

30

Dr. A. Jawahar Babu has presented a paper entitled "Implementation of Analytic Hierarchy Process (AHP) as a Decision support Tool for selection of Robot for Spot Welding Operation" at Second International Conference on Recent Advances in Engineering Sciences organized under TEQIP-II at Ramaiah Institute of Technology Belgaum held form 08.09.2016 to 09.09.2016.

31

B. V. S. Raghu Vamsi, "Studies on the critical size of the plastic zone in pure mode-I and mixed mode (I/II) fracture", IMME’17, International Conference at NIT Tiruchirapalli, 10-12 March, 2017

2017-18

S.NO Publications
1

Sri Kiran Prasad D, SriKishor Kumar K.Ch, “Vibration Analysis of Simple Rotor with Transverse Crack”, International Journal of Latest Technology in Engineering, Management & Applied Science (IJLTEMAS) Volume VII, Issue VI, June 2018 | ISSN 2278-2540

2

Sri P.N.S.Srinivas, Dr.P.RavindraBabu, “Experimental Investigation of Mechanical and Tribological properties of Aluminum Metal Matrix Composite (MMC) Reinforced with Alumina (Al2O3) using powder metallurgical process”, International Journal of Advanced Research in Science, Engineering and Technology, Vol. 5, Issue 5 , May 2018, pp. 5822 – 5888.

3

Sri B.V.S. Raghu Vamsi, Sri R.Jithendra Kumar, Dr. M.R.Ch.Sastry, Sri T. Siva Krishna, Sri M. Kamal Tej, "Experimental Investigation on the Performance of Vortex tube", Advanced Materials Research, June, 2018, ISSN: 1662-8985, Vol. 1148, pp 128-135, doi.10.4028

4

Sri R. Jithendra Kumar, Sri B. V. S. Raghu Vamsi, Sri T. Siva Krishna, Sri D. Tarun, Sri M. Kamal Tej, "Evaluation of Coefficient of Thermal Expansion of Zirconium by Using Dilatometer & ANSYS", Advanced Materials Research, June, 2018,ISSN: 1662-8985, Vol. 1148, pp 115-121, doi.10.4028

5

Sri J. Phani Kumar, Dr. B. Karuna Kumar (2018), “Experimental Investigations of TIG welded grade 202 Stainless steel weld specimens”, IEEE

6

Sri P. Tejomurthi, “Investigation of Mechanical Properties of Lady finger fibre glass reinforced thermoplastic composites”, International Journal of Engineering Trends and Technology, Vol. 59, Issue 4, May 2018, pg. 211-213

7

Sri B.V.S. Raghu Vamsi, Ms.V.J.K. Silpa(April, 2018) “Studies on the Critical Size of the Plastic Zone in Pure Mode-I and Mixed Mode (I/II) Fracture”, Materials Today Proceedings 5 (2018), pp-7765-7774, Elsevier.

8

Sri G. Karuna Kumar (April, 2018) “Supplier selection and order allocation in supply chain”, Materials Today Proceedings 5 (2018), pp-12161-12173, Elsevier.

9

Sri D. Kiran Prasad (March 2018), ‘Weight function approach for semi-elliptical crack at blade mounting locations in steam turbine rotor system”, PeriodicaPolytechnica Mechanical Engineering.

10

Sri T. Nagaraju (March, 2018) “Analysis on Mechanical Properties of Mould Vibrated Aluminium [AI 6063] Alloy Casting” International Journal of Engineering, Technology, Science and Research (IJETSR) Volume 5, Issue 3, ISSN 2394-3386.

11

Sri G. Karuna Kumar (Feb. 2018), “Investigation of effect of speed, feed and depth of cut on multiple responses using VIKOR analysis”, International Journal of Modern Trends in Engineering and Research, doi;10.21884/IJMTER.2018.5054.AUCUL, ISSN: 2349-9745

12

Sri B. V. S. Raghu Vamsi, Sri M. Kamal Tej, Sri P. Tejomurthy, Sri K. Kumara Swamy, “Studies on the affect of stress triaxiality on strain energy density, and CTOD under plane stress condition subjected to mixed mode (I/II) fracture”, International Journal of Control Theory and Applications, International Science Press, ISSN: 0974-5572, Vol. 10, No. 6, 2017, pg. no. 17-32  (Indexed to Elsevier Bibliography database)

13

Sri B.V.S. Raghu Vamsi, Sri K. Ch. Kishor Kumar, Sri D. Kiran Prasad, "Finite Element Analysis of An Edge Cracked Plate Subjected to Mixed Mode Loading (I/II) and Combined Tension-Bending – A Comparative Study", International Journal of Control Theory and Applications, International Science Press, ISSN: 0974-5572, Vol. 9, No. 42, 2017, pg. no. 15-30(Indexed to Elsevier Bibliography database)

14

Sri DittakaviTarun, Sri V. Mohan Srikanth ,SriR. Jithendra Kumar,  Sri I MeharAnudeep,  Sri S. Srikanth(2017) “Stress Analysis on a Chairless ChairInternational Journal of Theoretical and Applied Mechanics ISSN: 0973-6085 Volume – 12, Number4, pp – 699-708.

15

Sri T. Nagaraju (October, 2017) “Design and Fabrication of 4-Stroke SI Engine Connecting Rod of a Two Wheeler using A356 Alloy / Aluminium Oxide (AI203)” International Journal for Innovative Research in Science & Technology Issue 05, Volume 04.

16

Sri PremdasuNalluri, Dr. M.R.Ch. Sastry (12th August, 2017) “Experimental Investigation on VCR DI Diesel Engine Fuelled with Dual Bio-diesel Blends of Palm and Jatropha” International Journal of Modern Trends in Engineering and Research (IJMTER) ISSN (e): 2249-9745, ISSN (p): 2393-8161 Vol. 04, Issue 08, PP 25-35. (impact factor 4.364)

17

Sri P.N.S. Srinivas, Dr. P. RavindraBabu(7th July 2017) “Structural and Dynamic Analysis of Six Cylinder Four Stroke Diesel Engine Crank Shaft Subjected to Various Loading Conditions” International Journal of Latest Engineering Research and Applications (IJLERA) ISSN: 2455-7137 Volume – 02, Issue – 07, July – 2017, PP – 28-40

18

Conferences (2017-18)

19

R. Jithedra Kumar, "Evaluation of coefficient of thermal expansion of zirconium by using Dilatometer & ANSYS", at International Conference on Advanced Materials and Manufacturing Processes (ICAMMP-2018), organized by University College of Engineering, Vizianagaram (JNTUK, Kakinada), 30th - 31st March, 2018.

20

T. Nagaraju has presented a paper entitled “Analysis on Mechanical Properties of Mould Vibrated Aluminium [AI 6063] Alloy Casting” International Conference on Innovative Research in Engineering, Science, Management and Humanities (ICIRESMH-2018) organized by Conference Info in association with Academic Science at The Institution of Engineers India, Visvesvaraya Bhavan, Hyderabad on 18th March, 2018.

21

L. Ramesh has presented a paper entitled “Damage Detection in Structural Beams using Model Strain Energy Method and Wavelet Transform Approach” in 8th International Conference on “Materials Processing and Characterization (ICMPC-2018)” conducted by the department of Mechanical Engineering, Gokaraju Rangaraju Institute of Technology (GRIET), Hyderabad, Telangana in Collaboration with Maulana Azad National Institute of Technology, Bhopal, M.P. during 16th – 18th March, 2018.

22

J. A. Ranga Babu, I. Mehar Anudeep, M. Kamal Tej, K .Kumara Swamy, has presented a paper entitled “Evaluation of heat transfer characteristics of a mini channel with Nanofluids”, in International Conference on “Materials for Energy and Environmental Protection (ICMEEP)” held at Sir C. R. Reddy College (Aided and Autonomous), Eluru during 12th – 13th February, 2018.

23

A. Rajesh, has presented a paper entitled “Evaluation of thermophysical properties of ferrous nanofluids for heat transfer applications”, in International Conference on “Materials for Energy and Environmental Protection (ICMEEP)” held at Sir C. R. Reddy College (Aided and Autonomous), Eluru during 12th – 13th February, 2018.

24

G. Karuna Kumar has presented a paper entitled “Application of WPCA & CQL Methods in the optimization of Mutiple Responses” in International Conference on “Advances in Materials and Manufacturing Engineering (ICAMME-2018)” held at ANU Guntur during 22nd  – 24th January, 2018.

25

R. Jithendra Kumar has presented a paper entitled "Experimental and Micromechanical thermal characteristics of Jute-fibre reinforced polyster composites” in International Conference on “Advances in Materials and Manufacturing Engineering (ICAMME-2018)” held at ANU Guntur during 22nd  – 24th January, 2018.

26

Shravan Kumar Yadav has presented a paper entitled "Preparation and Characterization of ZA27-Alumina Graphite Reinforced Hybrid Composites” in International Conference on “Advances in Materials and Manufacturing Engineering (ICAMME-2018)” held at ANU Guntur during 22nd  – 24th January, 2018.

27

J. Phani Kumar has presented a paper entitled “Experimental Investigations of TIG Welded Grade 202 Stainless Steel Weld Specimens” in International Conference on Electrical, Computers, Communication, Mechanical and Computing (EECCMC) – 2018) held at Priyadarshini Engineering College, Vellore during 28th – 29th January, 2018.

28

Shravan Kumar Yadav has presented a paper entitled " Experimental Study on Thermo-physical Properties of Nano-fluids based on Copper Nanoparticles” in International Conference on “Nanotechnology: Ideas, Innovations and Initiatives-2017” held at Indian Institute of Technology, Roorkee, India during 6th – 8th December, 2017.

29

B. V. S. Raghu Vamsi, N. Premdasu have presented a paper entitled "Strength Analysis of Banana and Americana Hybrid Composite” in One day National Conference on “Recent Advances in Mechanical Engineering (NCRAME-17)” organized by Department of Mechanical Engineering, Prasad V. Potluri Siddhartha Institute of Technology, Kanuru, Vijayawada on 2nd December, 2017.

30

B. V. S. Raghu Vamsi has presented a paper entitled "Experimental Investigation on the Performance of Vortex Tube” at International Conference on Advanced Materials and Manufacturing Processes (ICAMMP-2018) held during 30th & 31st March, 2018, organized by Department of Metallurgical Engineering in association with IIM Vizag Chapter.

2018-19

S.NO Publications
1

Sri T. Nagaraju, Dr. P. RavindraBabu,Ms. A.C. Tejaswini, “An Investigation of alumina reinforcement effect on mechanical properties of Al 356 based metal matrix composite”, International Journal of Latest Engineering Science, Vol. 2, Issue 3, June 2019, ISSN: 2581-6659

2

Sri S. B. K. Reddy, Sri P. Murari, Mr. Syed. Siddiq, “Effect of silver nano-particle and grapheme powder on mechanical, microstructural and dry wear behavior properties of Al-7075 hybrid nano composite”, International Journal for Science and Advanced Research in Technology, Vol. 5, Issue 6, June 2019, ISSN: 2395-1052

3

Sri J. Chandra Sekhar, Dr. P. RavindraBabu, Dr. B. Karuna Kumar, Mr. D. Prem Kumar, “Preparation of Aluminum 6061-Zirconium Dioxide (ZrO2) MMC’s by stir casting and evaluation of mechanical properties”, International Journal for Research & Development in Technology, Vol. 11, Issue 6, June 2019, ISSN: 2349-3585

4

Dr. P. RavindraBabu, Dr. J. A. RangaBabu,Mr. M. Rambabu, “Mechanical Properties of particulate periwinkle shell – aluminum 6061 metal matrix composite produced by two-step casting”, Journal of Emerging Technologies and Innovative Research, June 2019, Vol. 6, Issue 6, (ISSN-2349-5162)

5

Sri P. N. S. Srinivas, Dr. M. R. Ch. Sastry, Dr. P. RavindraBabu,Mr. Y. ManideepVarma,“Effect of SiC and Zinc sterate on the mechanical and metallurgical characterization of functional graded material using powder metallurgy”, International Journal for Research in Applied Science and Engineering Technology, Vol. 7, Issue 6, June 2019, ISSN: 2321-9653

6

Sri L. Ramesh, Dr. P. RavindraBabu, Sri K. Ch. Kishore Kumar, Mr. D. Raju,“Single and Multiple-crack detection in cantilever beam using discrete wavelet transform”,International Journal of Scientific Research Engineering & Technology, Vol. 8, Issue 6, June 2019, ISSN: 2278-0882

7

Sri K. Ch. Kishor Kumar, Dr. A. JawaharBabu, Ms. K. Vara Lakshmi, “Analysis of Dry sliding wear behavior of Al-6061-Coconut shell ash metal matrix composites using stir casting”, Applied Engineering Letters (Journal of Engineering and Applied Sciences), Vol. 4, No. 2, 55-65, 2019

8

Sri D. Kiran Prasad, Sri K.Ch. Kishor Kumar, Mr. JaganTrinadh,“Analysis of simple rotor with two cracks”, International Journal For Research and Development in Technology, Vol. 11, Issue 6, June 2019, pp. 273 – 277

9

Sri D. Kiran Prasad, Sri K.Ch. Kishor Kumar, Sri JaganTrinadh, “Determination of stress intensity factors for semi-elliptical crack of two cracked rotor”, IJSART, Vol. 5, Issue 6, June 2019, pp. 610 - 614

10

Sri D. Kiran Prasad, “Theoretical investigation of stresses induced at blade mounting locations in steam turbine rotor system”, International Journal of Applied Mechanics and Engineering, Vol. 24, No. 2, 2019, pp. 295-307 (Scopus Indexed)

11

Dr. P. RavindraBabu, Dr. J. A. RangaBabu, Mr. M. Rambabu, “Effect of Mechanical Properties on palm sprout shell ash reinforced with Al-6061 alloy metal matrix composites”, International Journal of scientific Research & Engineering Trends, May-June 2019, Vol. 5, Issue 3, (ISSN-2395-566X)

12

Sri V. Mohan Srikanth, Sri S. B. K. Reddy, Sri S. Sriknath, Sri K. Ch. Kishor Kumar, ,Mr. P. Harish, “Mechanical Properties and Tribological behavior of Stir Cast Al-6063 Alloy Based Hybrid Composite Reinforced”, Journal of Advancements in Material Engineering, Vol. 4, Issue 2, 2019

13

Sri V. Mohan Srikanth, K. Ch. Kishor Kumar, Dr. P. RavindraBabu,Mr. P. Harish, “Characterization of Stir Cast Al-6063 Alloy Based Hybrid Composite Reinforced With Quarry Dust, Fly Ash and SIC”, Journal of Mechanical and Mechanics Engineering, Vol. 5, Issue 2, 2019

14

Dr. A. JawajarBabu, Dr. P. RavindraBabu, Sri K. Ch. Kishor Kumar, Mr. M. Deepak, “Mechanical behavior of Al 6061with reinforcement of E-glass fiber, SiC and fly ash by using Stir casting equipment”, Journal of emerging Technologies and Innovative Research, Vol. 6, Issue 5, May 2019, ISSN: 2349-5162

15

Sri K. Ch. Kishore Kumar, Dr. P. RavindraBabu, “Characterization of Al-15Ni-1Mg with reinforcement of Al2O3 and fly ash using powder metallurgy”, International Journal of Latest Engineering Sciences, Vol. 02, Issue 03, May 2019, ISSN: 2581-6659

16

Sri K. Ch. Kishore Kumar, Dr. M. R. Ch. Sastry, “Characterization of Al 6061-Coconut shell ash metal matrix composites using Stir casting”, International Journal of Latest Engineering Sciences, Vol. 02, Issue 03, May 2019, ISSN: 2581-6659

17

Sri V. Mohan Srikanth, Dr. P. RavindraBabu, Dr. M. R. Ch. Sastry, Mr. P. Harish, “Investigating the influence of cotton shell ash – SiC weight percentage on the mechanical behavior of aluminum alloy based hybrid composite”, International Journal for Research in Applied Science and Engineering Technology, Vol. 7, Issue 5, May, 2019

18

Sri D. Kiran Prasad, “Improved weight functions for stress intensity factors of semi elliptical crack in steam turbine rotor system”, Applied Engineering Letters, Vol. 4, Issue 2, pp. 24-32, 2019

19

Sri L. Ramesh, "Accurate characterization of crack in beam like structures using square of curvature mode shape: without baseline data", Journal of Mechanical EngineeringResearch and Developments (JMERD), Vol. 42, Issue 2, March 2019, pp. 58-66 (Scopus Indexed)

20

Sri L. Ramesh, Sri G. Karuna Kumar, Dr. P. RavindraBabu,Mr. D. Raju, “Multiple crack detection in beam structures using curvature based continuous wavelet transform”, Journal of Emerging Technologies and Innovative Research, April 2019, Vol. 6, Issue 4, (ISSN-2349-5162)

21

Sri P. N. S. Srinivas, Dr. M. R. Ch. Sastry, Dr. P. RavindraBabu,Mr. Y. ManideepVarma,“Design and Characterization of Functionally Graded Aluminum Metal Matrix with SiC Reinforcement using powder metallurgy”, International Journal of Mechanical and Industrial Technology, Vol. 7, Issue 1, April 2019, ISSN: 2348-7593

22

Sri Karuna Kumar. G, Dr. B. Karuna Kumar, “An Integrated method for the quantity to be ordered to supplier”, International Journal of Research in Advent Technology, special issue, March 2019

23

Sri S. Srikanth, “Wear and Friction behavior of coconut shell ash reinforced AA-7075 metal matrix composites”, International Journal of Research, Vol. 8, Issue 3, March 2019 (UGC Approved Journal)

24

Sri P. Murari, Sri K. Ch. Kishor Kumar, Dr. M. R. Ch. Sastry, Mr. K. S. S. Balaji, “Investigation on Mechanical characterization of Al-6063 MMCs with reinforcements of SiC, TiO2, ZnCl2 by using stir casting”, International Journal for Research in Applied Science and Engineering Technology, Vol. 7, Issue 3, March 2019, ISSN :2321-9653

25

Sri J. Chandra Sekhar, SriK. Ch. Kishor Kumar, Dr. M. R. Ch. Sastry, “Development and characterization of Al-6061 Zirconium dioxide reinforced metal matrix composites by stir casting”, International Journal for Research in Applied Science and Engineering Technology, Vol. 7, Issue 3, March 2019, ISSN :2321-9653 (UGC Approved Journal)

26

Smt. M. Krishna Prasanna, Sri P. Murari, Dr. M.R.Ch. Sastry, Mr. ThalluruPavanTeja, “An Experimental Investigation of Heat Transfer Characteristics in Tapered Cylindrical Fins under Natural and Forced Convection”, International Journal of Research and Analytical Reviews, March 2019, Volume 6, Issue 1, ISSN: 2349-5138

27

Sri MurariPanem, Dr. RavindraBabuPotluri, Smt. Krishna Prasanna Monday, SriBajiKarimulla Reddy Seelam, “Modeling of leaf spring contacts by finite element approach using Lagrange multiplier method”, International Journal of Research and Analytical Reviews, March 2019, Volume 6, Issue 1, ISSN: 2349-5138 (UGC Approved Journal)

28

Smt. M. Krishna Prasanna, Sri P. Murari, Sri T. Siva Krishna, Dr. M. R. Ch. Sastry, “An experimental investigation of heat transfer characteristics in plain and tapered spines”, International Journal of Research in Advent technology, Vol 7, Issue 3, March 2019, ISSN: 2321 - 9637

29

Sri P. Tejomurthi, Dr. K. SyamSundar, Dr. M. R. Ch. Sastry, “Experimental Investigation of Mechanical Properties of Lady Finger Glass Reinforced Polyster Composites”, International Journal of Research in Advent Technology, March 2019 EISSN: 2321-9637, pp. 255-259

30

Sri G.Karuna Kumar, “A Fuzzy Multi Objective Technique for Quality to be Ordered on Supplier”,  International Journal of Mechanical Engineering and Production Engineering Research and Technology (IJMPERD), Vol.9, Issue 01,Feb 2019,509-522.(Scopus Indexed journal)

31

Sri Karuna Kumar. G, “Supplier Selection and Evaluation in supply chain management”, International Journal of Science and Research, Vol. 7, Issue 12, December 2018, ISSN: 2319-7064.

32

Dr. A. JawaharBabu, “A Gravitational Search Based Optimization of Job Shop Scheduling Problem”, International Journal of mechanical and Production Engineering Research and Development, Vol. 8, Issue 6,ISSN(P):2249-6890, pp. 465-478, December 2018(Scopus Indexed Journal)

33

Sri Lanka Ramesh, “Vibration based Damage detection of beam like structures using Discrete Wavelet transform”Applied Engineering Letters Vol.3, No.4, 115-123 (December 2018) e-ISSN: 2466-4847.

34

Sri G.Karuna Kumar, “Fuzzy Optimization Technique in Inventory Cost Minimization”, International Journal of Mechanical Engineering and Technology (IJMET), Volume 9, Issue 13, December 2018, pp.1527-1536 (Scopus Indexed journal).

35

Sri Murari. P, Sri SatyaSaiBalaji K, “Nature of Aluminium-6063 Metal Matrix Composite with Reinforcement of Silicon Carbide by Using Stir Casting:A Review”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 7, Issue 11, November 2018

36

Mr. PrasannaNagasai B., Sri S. Srikanth, “Characteristic behavior of aluminum metal matrix composites: A Review”, International Journal of Trend in Scientific Research and Development, Vol. 2, Issue 6, Sept – Oct 2018, ISSN: 2456-6470

37

Dr. J. A. RangaBabu, “Performance and emission analysis of diesel engine with design modifications on piston crown”, International Journal of Ambient Energy, Taylor and Francis, October, 2018

38

Sri L. Ramesh, “Damage detection in structural beams using model strain energy method and wavelet transform approach”, Materials Today: Proceedings Volume 5, Issue 5, Part 2, 2018, Pages 19565-19575.

39

Dr. B. Karuna Kumar, “Coordinated Two-Echelon Inventory Model for Optimal Inventory and Shipment Decisions under Exponential Price Dependent Demand”, Materials Today: Proceedings Volume 5, Issue 5, Part 2, 2018, Pages 12356-12367

40

Sri Kiran Prasad D, “Universal weight function approach to determine stress intensity factors at blade mounting locations in steam turbine rotor system”, International Review of Mechanical Engineering, Vol. 6 (Scopus Indexed Journal)

41

Dr. A. JawaharBabu, “Optimization of Helical Spring Weight using Metaheuristic Algorithms”, Volume 5, Issue 2, Trends in Machine Design (STM Journals), ISSN: 2455-3352, pp. 21 – 28

42

Sri NagarajuTenali, “An Investigation of Mechanical and Metallurgical Properties of Aluminium-6063alloy Friction Stir Weld”, International Journal for Scientific Research & Development| Vol. 6, Issue 05, 2018, pp. 661 - 663, ISSN: 2321-0613.

43

Sri B.V.S. Raghu Vamsi, Dr. P. Nageswara Reddy, Mr. Ch. DurgaJayateja,“Studies on the Effect of CTOD (Crack Tip Opening Displacement) on the Stress Triaxiality under Mixed Mode Fracture (I/II) in Plane Strain Condition”, International Journal for Scientific Research & Development| Vol. 6, Issue 05, 2018, pp. 351-360, ISSN: 2321-0613.

44

Conferences(2018-19)

45

J. Phani Kumar, has presented a paper entitled "A novel approach for utilization on walnut shell ash as reinforcement in aluminum matrix composites" in the International Conference on Advances in Material and Manufacturing Engineering – 2019 organized by Kalinga Institute of Industrial Technology, Bhubaneshwar held during March 15th & 17th, 2019

46

P. Tejomurthi, has presented a aper entitled "Experimental Investigation on Mechanical Properties of Lady Finger GRPC" in the 3rd National Conference on Recent Trends & Innovations in Mechanical Engineering organized by Department of Mechanical Engineering Nalla Narasimha Reddy Education Society’s Group of Institute – Integrated Campus Medchal Dist. Hyderabad held on March 15th & 16th, 2019

47

G.Karuna Kumar has presented a paper entitled “An integrated method for the quantity to be ordered to supplier ” at 3rd National Conference on Recent Trends and innovations in Mechanical Engineering, organized by Nalla  Narsimha  reddy group of institutions held on 15th – 16th March 2019.

48

S. B. K. Reddy, P. Murari, V. Mohan Srikanth, has presented a paper entitled “Effect of silver nano particle and graphene powder on tribological properties of Al 7075 hybrid nano-composite”, at two day National Conference on “Recent Advances in Mechanical Engineering and Material Characterization (NCRAMEMC-19)”, organized by Prasad V. Potluri Siddhartha Institute of Technology, Vijayawada held on 15th – 16th March 2019.

49

T. Siva Krishna, M. Kamal Tej, Abstract of the paper entitled “Energy and Exergy analysis of Biofuel blends used in Internal Combustion Engines”, was published in the Proceedings of Multi-disciplinary International Conference – GTUICON 2019, organized by Gujarat Technological University, Gujarat ISSN: 978-93-5351-069-5

50

Dr. J.A. Ranga Babu, Dr. P.Nageswara Reddy presented a paper entitled “Evaluation of Heat transfer Characteristics of  FE304 Nano fluids in mini channel heat sinks”, at 12th  International conference on Thermal Engineering-Theory and Application February 23-26 2019,Gandhinagar,India.

51

Dr. P.Nageswara Reddy has presented a paper entitled “Performance Enhancement of Unitary and Packaged Air Conditioners with phase change material”, at 12th  International conference on Thermal Engineering-Theory and Application February 23-26 2019,Gandhinagar,India.

52

P.Tejomurthi has presented a paper entitled “Experimental analysis of solar assisted liquid desiccant cooling system”, at Conference on “Technologies for future cities 2019”, organized by Mahatma Educational Society’s Pillai College of Engineering, Mumbai held during 08th – 09th January, 2019.

53

S. Srikanth, has presented a paper entitled “Mechanical Behavior of ZrO2 reinforcced Al-Zn alloy based metal matrix composites fabricated by Stir casting method”, at National Conference on Advanced in Mechanical Engineering, organized by Sir Vishveshwaraiah Institute of Science and Technology, Chittoor on 2th January, 2019.

54

P. N. S. Srinivas, has presented a paper entitled “Development, Fabrication and Characterization of Functionally Graded Al Metal Matrix Composites using Powder Metallurgy Method”, at National Conference on Emerging Trends in Mechanical Engineering  (ETME 2019) organized by National Institute of Technology, Warangal during 09th – 10th January, 2019.

55

R. Jithendra Kumar, B. V. S. Raghu Vamsi, Dr. M. R. Ch. Sastry has presented a paper entitled “Experimental Investigation of flow over different geometrical objects in an open channel”, at National Conference on Emerging Trends in Mechanical Engineering  (ETME 2019) organized by National Institute of Technology, Warangal during 09th – 10th January, 2019.

56

K. Ch. Kishor Kumar, T. Nagaraju, D. KiranPrasad, Dr. P. Ravindra Babu,  has presented a paper entitled “Characterization of AL-6061 Alloy reinforcement with Al2O3, SiC, TiO2 and Fly Ash using Stir Casting”, at International Conference on Recent Advances in Materials, Manufacturing & Energy Systems (ICRAMMES 2019) organized by V R Siddhartha Engineering College, Vijayawada during 3rd – 4th January, 2019.

57

P. N. S. Srinivas, Dr. P. Ravindra Babu, Y. Manideep Varma has presented paper entitled “Development, Fabrication and characterization of functionally graded Aluminum metal matrix composites using Powder Metallurgy”, at International Conference on Recent Advances in Materials, Manufacturing & Energy Systems (ICRAMMES 2019) organized by V R Siddhartha Engineering College, Vijayawada during 3rd – 4th January, 2019.

58

D. Mohan Krishna has presented paper entitled “Experimental Evaluation of Effect of Rolling Temperatures on Pure Copper”, at International Conference on Recent Advances in Materials, Manufacturing & Energy Systems (ICRAMMES 2019) organized by V R Siddhartha Engineering College, Vijayawada during 3rd – 4th January, 2019.

59

V. Mohan Srikanth, S. Srikanth, has presented a paper entitled “Design and analysis of composite leaf spring”, at International Conference on Recent Advances in Materials, Manufacturing & Energy Systems (ICRAMMES 2019) organized by V R Siddhartha Engineering College, Vijayawada during 3rd – 4th January, 2019.

60

Dr. P. Nageswara Reddy has presented paper entitled “Feasibility study of solar vapour absorption cogeneration plant for space cooling/heating and electrification of Residual buildings”, at 33rd Indian Engineering Congress organized by Institution of Engineers (India) during 21st – 23rd December, 2018 at Udaipur.

61

Shravan Kumar Yadav, P. N. S. Srinivas, G.Karuna Kumar have paper entitled “An investigation on the mechanical properties of hybrid metal matrix composites”, at 19th ISME Conference on Advances in Mechanical Engineering Energy Systems (ISME 2019) organized by Dr. B. R. Ambedkar National Institute of Technology, Jalandhar during 20th – 22nd December, 2018

62

M. R. Ch. Sastry, has presented a paper entitled “Study of Fluid Flow on a Flat Plate with Rectangular Impinging Slot Jet”, at 7th International and 45th National Fluid Mechanics and Fluid Power Conference (FMFP-2018) organized by IIT Bombay, Mumbai, India during 10th – 12th December, 2018.

63

J. A. Ranga Babu has presented a paper entitled "Solar Organic Cogeneration Plant for Electrification and Air-Conditioning of Residential Buildings and Domestic Hot Water” at All India Seminar on Engineering Innovation to Product and Services, Annual Technical Paper Meet – 2018 held during 13th and 14th October, 2018, organized by Institution of Engineers (India), Pune Local Centre.

64

J. A. Ranga Babu, S. Srikanth, has Presented a Paper entitled "Mechanical Properties of AA7075-nano ZrO2 reinforced matrix composites" in the 1st International Conference on Applied Mechanical Engineering Research organized by National Institute of Technology, Warangal held during 02nd – 04th May, 2019

2019-20

S.NO Publications
1

Ms. A. C. Tejaswini, Sri T. Nagaraju, Dr. P. RavindraBabu, Dr. M. R. Ch. Sastry, “Analysis on Mechanical and Metallurgical properties of A356 based metal matrix hybrid composites”, Journal of Mechatronics Machine Design and Manufacturing (Accepted for Publication) MAT Journals.

2

Sri J. Phani Kumar, Sri K. Ramakanth, Dr. P. RavindraBabu, Mr. P. YugandharBabu, “Experimental investigations for evaluation of mechanical properties of aluminum matrix composites reinforced with copper particles”, (Accepted for Publication) MAT Journals

3

Sri R. Jithendra Kumar, “Experimental and micromechanical thermal characteristics of jute fiber reinforced polyester composites”, Materials Today: Proceedings, Vol.(00), 2018, (Accepted for publication)

4

Sri G. Karuna Kumar, “Application of WPCA and CQL methods in the optimization of multiple responses”, Materials Today: Proceedings, Vol. (00), 2018 (Accepted for publication)

5

Sri Shravan Kumar Yadav, Sri G. Karuna Kumar, “Preparrtion and characterization of Za27–Alumina–Graphite reinforced hybrid composites”, Materials Today: Proceedings Vol. (00), 2018, Pages (Accepted for publication)

6

Dr. B Karuna Kumar, "On the optimality of inventory and shipment policies in a two-level supply chain under quadratic price dependent demand", Int. J. Logistics Systems and Management, Vol. X, No. Y, xxxx (Accepted for Publication - Scopus Indexed Journal DOI: 10.1504/IJLSM.2020.10015734

7

Sri S. B. K. Reddy, Sri V. Mohan Srikanth, Dr. P. RavindraBabu, Mr. P. Hairsh, Mr. Syed Siddiq, “Influence of Graphene and Alumina on mechanical and microstructural properties of Al 7075 based hybrid composites”, Journal of Advancement in Machines, Vol.4, Issue 2, July 2019, pg. 10-22, doi.org/10.5281/zenodo.3340375

8

Sri V. Mohan Srikanth, Dr. P. RavindraBabu, Dr. M. R. Ch. Sastry, Sri K. Ch. Kishor Kumar, “Characterization of mechanical and tribological properties of aluminum alloy based hybrid composites reinforced with cotton shell ash and silicon carbide”, International Journal of Latest Engineering Science, Vol. 2, Issue 4, July 2019

9

M.Deepak, Dr. A. JawaharBabu, Sri K. Ch. Kishore Kumar, Sri J. Phani Kumar, “Metallurgical and TribologicalBehaviour of Al6061 with Reinforcement of E-Glass Fiber, SiC and Fly Ash by using Stir Casting”, International Journal for Research in Applied Science &Engineering Technology, Vol. 7, Issue VII, July 2019, ISSN: 2321-9653

10

Conferences (2019-20)

11

T. Siva Krishna, has presented a paper entitled, “Second Law Analysis of Latent heat storage system for Solar Power Plant”, in the 11th International Exergy, Energy, and Environment Symposium (IEES-11) organized by SRM Insititute of Science and Technology, Chennai held during 14th – 18th July, 2019

12

Dr. P. Nageswara Reddy, has presented a paper entitled “Investigation of the Performance of a Three Stage Combined Power Cycle for Electric Power Plants”, in the ASME 2019 Power and Nuclear forum organized by ASME, New York during 14th – 19th July, 2019